-
Stryker 940-25 Stainless Steel Replacement Cast Saw Blade
$59.95Add to cartThe Stryker 940 Stainless Steel cast saw blade is a basic, economical accessory hardened and tempered to provide durable cast removal in the general orthopedic and sports medicine environment. A lower cost blade that provides long life and aggressive response during fracture cast removal.
-
-57%
Stryker 940-35 Titanium Nitrided Replacement Cast Saw Blade
$69.00Add to cartThe Titanium coating provides a lubricious surface which reduces friction at the Cast/blade interface. Lower blade temperatures and improved cutting characteristics provide lower operating temps and less strain on the saw motor. Another benefit to Ti is greater tooth hardness, resulting in longer blade life.
-
Stryker 986 wheels (1 set of 5 replacement wheels)
$149.00Add to cart1 Set of (5) five wheels
These are the correct size thread posts to fit the rolling stand which accompanied the Stryker 986 CastVac system. -
Stryker 940 Cast Dust Collection Shroud REPAIR Kit
$249.00Add to cartThis is the Stryker 940/986 cast cutter repair kit. It allows you to repair your broken dust collection shroud without having to send it out for repairs! In 90% of these cases where the dust collection shroud is broken off, this kit allows you to make the repair; simply, and easily! You save money on shipping! You don’t pay a flat repair charge. And you are back in business in about 15 minutes! Easy to read instructions show how simple the repair can be…with hardware and parts designed specifically to remedy this problem.
If you have dropped your 940/986 cast cutter and the transparent dust collection shroud is damaged or broken, chances are pretty good that you can repair it “in-house”… (read product description)
-
-81%
Stryker 940-26 Replacement Cast Saw Blade
$29.95Add to cartThe PTFE (Teflon) coated blade has been developed to provide a lower cost, low-temperature generating 940 replacement blade. This is particularly useful in pediatric applications, or simply any ortho clinic where particular attention is paid to blade cutting temperature over time. Thick casts, long leg casts, hip spicas, and body jackets are all time-consuming casts to remove, where build-up of heat at the blade/cast interface becomes a concern. Users have reported lower blade temps, likely attributable to the reduced friction generated between the Teflon coated blade surface and synthetic casting materials being transected. These blades also offer impressive durability.
-
Stryker 940-23 Ion Nitrided Replacement Cast Saw Blade
$129.95Add to cartThese blades are an updated DIRECT REPLACEMENT! Please read on…
This product is replacing the Stryker 940-23 Ion Nitrided cast cutter blade which has been out of production by Stryker for nearly 2 years, concurrent with the height of the COVID pandemic. We have re-issued this blade using the same process and technology used by Stryker according to their specifications. We make this replacement blade available ONCE AGAIN, for those users who seek maximum performance, minimal heat retention/generation and extended useful blade life cycle. This is THE ONLY 940-23 Ion Nitrided Blade in production for the Stryker 940 Saw at this time AND WE HAVE IT available for you.
Packaged one blade per package.
-
Lipshaw Autopsy Saw, (New, in box)
$895.00Add to cartThis is a brand new autopsy saw originally made by M-Pact Worldwide, who made the same saw for a variety of large medical manufacturers under a “private label” license. You’ll recognize this same saw with the label Thermo-Shandon, Mopec, BSN, Zimmer, DePuy and several other well-respected names on their labels. That’s good news, because once again, we’d point out that serviceability must be a paramount consideration when purchasing any machines. Any machine which cannot be repaired when a problem occurs has lost all value. Conversely, the machine which can be repaired again and again continues to provide reduced cost of ownership for as long as the machine is in service!This saw can be serviced today, tomorrow, and for many years to come. It uses all standard tri-drive autopsy blades. -
M-Pact 4183 Cast Saw 4183 (New, in box)
$795.00Add to cartA very popular cast cutter for the practitioner who needs to remove casts on an occasional basis, but not a volume like you might expect to encounter in a hospital or orthopedic clinic venue. A very reliable saw that has been around for more than 30 years, but is currently not in production. So, even though this saw is a rarity to find “brand new” we do have the ability to maintain it, or repair it if necessary. This saw, brand new, cost less than half of what you’d have to pay for a new, professional quality saw. Comes with extra blades, blade change wrench and user manual. Six month warranty. Not applicable for P&O applications. -
Stryker 840 Long Cord Cast Cutter with Accessories
$895.00Add to cartWe rebuild Stryker cast cutters to “like new” condition. This package is designed for the practitioner who is removing casts; perhaps on a house-call type basis, or in an office setting where an occasional cast is needed to be removed. Extra blades are included, with the required blade-change tool, and a cast spreader; an absolute must have item for easy, professional results. A Stryker saw is the undisputed leader in all things casting; and this investment is likely to be a one-time expenditure that will remain your “go to” saw for your entire professional career.
As shown, includes everything you see pictured…. -
Stryker 986 CastVac ( as pictured, refurbished with 1 year warranty)
$3,795.00Add to cartThe Stryker 986 CastVac is the most popular, most dependable, most powerful cast removal system ever made; by the original manufacturers of the very first electric cast cutter ever made. Stryker may have stopped production of these excellent machines, but our company The Cast Cutter Repair Center has designed a refurbishment program that restores these saws and vacuums to nearly new condition…
-
Stryker 810 Autopsy saw (refurbished, 1 year warranty)
$795.00Add to cartWe specialize in the rebuilding/restoring the Stryker 810 Autopsy Saw. Because the Stryker saw is currently not in production, users are confronted with a conundrum; repair your broken saws, or purchase a “knock-off” saw from a lower quality provider at three times the price!
We are masters at rebuilding cast saws and autopsy saws. We will restore your saw to “like new” condition at a fraction of the cost of a new saw. Your saw will be rebuilt and provided with a six month warranty, same as new!
We rebuild your saw Stryker 810…………………………795.00 ea.
-
American Orthopedic 295-200 cast cutter (New, in box)
$1,495.00Add to cartThe American Orthopedic 295-200 is possibly the most widely purchased cast saw available today. The Model 295 is a proven performer with 50 years of reliable service history. It is powerful, relatively quiet, and best of all…serviceable! Thats very important , because many saws being sold today at lower prices cannot be repaired. You may not be told this when you purchase saws made in foreign countries, but repair parts are simply not available. You then realize that whatever you spent for a “bargain” saw, is a 100% lost investment. American Orthopedic saws are infinitely repairable. That makes their cost of ownership over time…..to be pennies! This saw is a wise choice for all specialties of orthopedics and other sub-specialties in the field of medicine and surgery.
-
BSN Bandage Scissors
$49.95Add to cartA professional quality version of the Esmarch Bandage scissor. A larger handle for greater fulcrum effect, resulting in easier cutting, and less hand fatigue. Surgical steel that retains sharpness cutting a variety of casting materials.
-
Stryker 3/16 Hex Key
$19.95Add to cartIf you have a Stryker 940 cast saw, you MUST have a blade change “key” to replace the cast saw blade at given intervals. This 3/16” Allen wrench with comfort handle is absolutely what you need!
-
Companion Blade Wrench
$19.95Add to cartIf you have older cast cutters which employ conventional style “blade nut” attachment hardware, you need an adjustable wrench to make blade changes. Order several to keep these handy and place one in each cast room!
-
Stryker 82 Cast Spreader
$295.00Add to cartThe model 82 hand-held cast spreader/breaker utilizes four (4) prongs or “teeth” to open a larger swath of cast with each application. A more efficient tool than the inexpensive variety (3) three-tooth spreaders that are significantly less effective. Most people who have used the Model 82 never go back to the three pronged types that are really inferior and more time consuming.
-
Stryker On/Off Power Switch
$64.95Add to cartStryker On/Off Power Switch.
This electro-mechanical switch fits the models Stryker 840,848,and 810 saws. It is a 120v,14amp capable control slim fit which is pre-wired for your convenience. It is provided, as pictured with the required retention hardware. Installation should only be by “crimp “ connection to insure integrity and safety, and be performed by qualified biomedical technicians, or similarly trained personnel. -
Stryker 986 Vacuum Lid Hold-Down Hinge Set (1 side only/set)
$92.00Add to cartLid Hinge replacement kit for Stryker 986
You can replace lost, or broken lid hold-down hinges on your Stryker 986 vacuum. This kit provides one latch, (lid) and one catch (tank) with attachment screws. -
Stryker 940/986 Cast Cutter Handpiece Dust Hose to Vacuum
$295.00Add to cartStryker 986 CastVac replacement hose assembly. This is the replacement hose for the Stryker CastVac 986. It is pictured with the power cord cable straps, however they must be ordered separately. The replacement hose is supplied without the cable straps. The Hose coupler-connectors which are on either end of the hose to connect to the saw, and dust vacuum are included.
-
Stryker 940 Cast Cutter 120V Control Module (power output)
$92.00Add to cart940 Power Output board
This unit controls the speed and power distribution for the cast cutter saw. -
Rubber Cable Power Cord Attachment Straps (1 set of 6)
$39.95Add to cartUniversal Cable/power cord attachment straps (rubber) for associating the cast cutter saw power cord in parallel with the vacuum dust hose. This provides for easy movement around the patient when removing a cast; no tangles or tripping over cords which are not secured. These straps organize your cast cutter and dust collection hose and cord to prevent cord damage from wheels or hard shoes which can cut your power cord; or damage the outer insulation.
-
Front Drive Assembly – Stryker
$324.95Add to cartFront drive assembly for Stryker 940
This modular drive will replace broken, worn or damaged oscillation drive mechanisms for the Stryker 940 saw. The kit comes with the screws, and lubricant, and gasket needed to complete the exchange, and simple directions are provided. Please note that additional components (e.g. needle bearing, shaft oscillation cam) may be required if damaged or worn. If you are in doubt about the repairs need for your saw, call our technical staff for guidance or assistance. These parts are not returnable. -
American Orthopedic 295-200 Blade Hold-down Hrdwr
$29.95Add to cartThis is the correct hardware for the American Orthopedic, BSN, Zimmer, DePuy, and M-pact (blue exterior paint color) saws. These saws were all made by American Orthopedic for several large orthopedic products companies. This set of “hold-down” components contains the three essential parts needed to secure the blade firmly against the shaft octagonal drive, to prevent unwanted rotation of the blade. Includes directions (diagram) for proper installation.
-
Needle Bearing – Stryker
$69.95Add to cartStryker 840,848,810 and others Needle Bearing
The main bearing utilized in the front drive assembly of most all Stryker cast cutters and autopsy saw, is the needle bearing. This precision aircraft grade bearing transfers the rotational motion of the motor shaft cam to the blade shaft link and is responsible for smooth energy transfer and smooth operation. This bearing will be damaged by “bogging down” the saw when cutting a cast. A damaged bearing must be replaced to allow for correct saw operation. A saw that gets loud; warm or hot to hold during operation , often has a damaged needle bearing. Other components may also require replacement in conjunction with the damage. -
The BSN 2.5” Titanium Blade
$57.25Add to cartThe BSN 2.5” Titanium blade is the most efficacious cast cutter blade for use with today’s hard synthetic casting materials. The blade is comprised of stainless steel opposed tooth cutting configuration that are plasma coated with Ti dioxide to create a very hard, and wear resistant coating. The titanium coating resists wear, and strengthens the blade teeth, which by themselves would dull more quickly without the benefit of the Ti coating. A side benefit to this coating is faster cutting, allowing for cooler blade temperatures; so “burning” a patient with a hot blade is far less likely. Shorter cutting times also translate into less strain on the cast saw motor; which over time can contribute to motor burnout. All said, this blade IS (in our opinion) worth the additional cost when all the benefits are considered!
-
Stryker 840-23 Ion Nitrided Replacement Cast Saw Blade
$149.95Add to cartThe Stryker 840-23 cast cutter blade provides maximum blade life with excellent performance in rapid, safe, cast removal. Boron nitriding provides a heat dissipating state of the art coating; while providing maximum tooth hardness which translates into extended blade life. Packaged one blade per package.
-
MPact Light Duty Cast Cutter Saw (Refurbished)
$495.00Add to cartMPact Light Duty cast cutter saw. Because it is a good quality, powerful and well made tool, at a very reasonable price-point. It is very popular with medical professionals who need to remove a cast or two on occasion and do not have access to the additional resources needed for a higher quality product.
This saw will get the job done and does have the ability to be coupled to a dust collection system as well. Many pro’s use them just as pictured above. Comes with the blade, and a blade wrench. The cast spreader in the photo is available at an extra charge. -
American Orthopedic Model 295-200 Cast Cutter Saw (Refurbished)
$795.00Add to cartThis saw is modeled after the Stryker 840 saw, and is comparable in terms of power, weight, and reliability. (Refurbished 1-year warranty). This saw, though no longer being manufactured, is available from us in refurbished configuration and is in like new condition
-
M-Pact 4183 Light Duty Cast Cutter Refurbished (Martin Medical)
$495.00Add to cartMPact Light Duty Cast Cutter Saw (Refurbished) suitable for occasional use in practices where fracture casting is not used frequently as a treatment modality.(6 month warranty). This saw is designed for the practitioner who occasionally needs a saw to remove a cast, but does not perform cast removal as a mainstay in their practice. Properly used, this saw is a very good tool for a back-up saw, as well.
-
DeSoutter CC5 Cast Cutter with Dust Vacuum System (new, unused)
$3,795.00Add to cartThe DeSoutter CC5 Clean Cast System cast removal system for orthopedic cast removal. An extremely quiet, yet powerful; two speed saw handpiece and two speed vacuum dust extractor gives the user selectively for adjustment of sound vs. power. Particularly useful in pediatric applications where sound reduction is helpful with patient compliance.Note to equipment buyers:These units are serviceable. Parts for repair continue to be available. Always investigate these aspects of repairability when considering the purchase of medical equipment. Many foreign manufacturers do NOT offer parts or repair support, making the equipment unrepairable if broken. Always ask sellers if their products can be sustainably supported! -
Stryker 810 Autopsy Saw
$895.00Add to cartStryker 810 Autopsy Saw. Powerful, and light-weight (4.5 lbs) it is the saw most pathologists used from the earliest times of their practice.It has the familiar “feel” and is easiest to clean. This tool can also be used in the veterinary profession as a TPLO saw as it readily adapt to the saw blades available for the procedure.
-
Stryker 840 Cast Cutter – Completely Refurbished Unit
$695.00Add to cartThe finest Cast Cutter ever made. Eighty percent of these saws are still in service after 30 years in use. Powerful, ergonomic; durability and serviceability are qualities that make this saw timeless. This saw defies entropy, as it can be rebuilt over and over again. Never buy another cast cutter when you own one of these! Completely Refurbished Unit!
-
Stryker 940 Cast Cutter – Reconditioned/Certified
$1,795.00Add to cartA well maintained & completely reconditioned Stryker 940 Cast Cutter with an included ONE YEAR WARRANTY! As an added EXCEPTIONAL value, your purchase ALSO includes five (Stryker 940-25) cast cutter blades.
We offer all service and support on these dependable machines because we ARE a repair company with over 40 years of experience servicing cast saws and the G.O.A.T. of the industry! You are absolutely assured of on-going blade availability, as we stock all forms of blades, dust filters, hoses, rolling stand wheels, and more; (items too numerous to list)! These machines will be supported by us for MANY YEARS TO COME!JUST A REMINDER that ALL BLADES, and accessories are available and will be supported for many many years to come.